Microchip SAMR21 Xplained Pro
|board ID||radio||OS support||deployment|
|samr21||802.15.4||RIOT Contiki-NG||Lille 5 Saclay 15|
The SAMR21 board is based on an Microchip SAM R21 Xplained Pro evaluation kit built on top of an Microchip ARM Cortex M0 micro-controller. This board also provides an IEEE 802.15.4 Atmel radio interface at 2.4 GHz.
The SAMR21 board can reset, debug and program the ARM Cortex M0 through the embedded debugger (EDBG) connected to the gateway USB port. This component also allows a UART connection to the M0. The input power source is configured through the power management.
IoT-LAB special configuration
The serial connection baudrate should be configured at 115200 bauds in the firmware.
Schematics and Datasheets
In details, the main hardware components contained in the node are :
- ATSAMR21G18A (48 MHz, 32bits, 32kB RAM, 256kB flash)
- Radio interface 2.4 GHz AT86RF233
- One on-board LED (orange)
Extensions with sensors
Nodes in Saclay site (samr21-1 to samr21-15) are equipped with Microchip IO1 Xplained extension. On those nodes, extra sensors are also available: